Show Dot1X - NETGEAR ProSafe M7100-24X User Manual

show dot1x

This command is used to show a summary of the global dot1x configuration, summary
information of the dot1x configuration for a specified port or all ports, the detailed dot1x
configuration for a specified port and the dot1x statistics for a specified port - depending on
the tokens used.
Format
show dot1x [{summary {<unit/slot/port> | all} | detail
<unit/slot/port> | statistics <unit/slot/port>]
Mode
Privileged EXEC
If you do not use the optional parameters <unit/slot/port> or <vlanid>, the command
displays the global dot1x mode, the VLAN Assignment mode, and the Dynamic VLAN
Creation mode.
Term Definition
Administrative
Indicates whether authentication control on the switch is enabled or disabled.
Mode
VLAN
Indicates whether assignment of an authorized port to a RADIUS assigned VLAN is
Assignment
allowed (enabled) or not (disabled).
Mode
Dynamic VLAN
Indicates whether the switch can dynamically create a RADIUS-assigned VLAN if it does
Creation Mode
not currently exist on the switch.
Monitor Mode
Indicates whether the Dot1x Monitor mode on the switch is enabled or disabled.
If you use the optional parameter summary {<unit/slot/port> | all}, the dot1x
configuration for the specified port or all ports are displayed.
Term Definition
Interface
The interface whose configuration is displayed.
Control Mode
The configured control mode for this port. Possible values are force-unauthorized |
force-authorized | auto | mac-based | authorized | unauthorized.
Operating
The control mode under which this port is operating. Possible values are authorized |
Control Mode
unauthorized.
Reauthenticatio
Indicates whether re-authentication is enabled on this port.
n Enabled
Port Status
Indicates whether the port is authorized or unauthorized. Possible values are authorized
| unauthorized.
ProSafe Managed Switch
Switching Commands
85