Show Ip Pim Neighbor; Ip Pim Sparse(Global Config) - NETGEAR ProSafe M7100-24X User Manual

Join Prune Interval (secs) 60
DR Priority NA
BSR Border Disabled
Neighbor Count 1
Designated Router NA

show ip pim neighbor

This command displays the neighbor information for PIM on the specified interface.
Format
show ip pim neighbor <unit/slot/port>
Modes
Privileged EXEC
Term Definition
Neighbor
The IP address of the PIM neighbor.
Address
Interface
Interface number. Valid slot and port number separated by forward slashes.
UpTime
The time since this neighbor has become active on this interface.
Expiry Time
Time remaining for the neighbor to expire.
DR Priority
DR Priority configured on this Interface [ PIM -SM only ].
(Switch) #show ip pim neighbor 1/0/1
Neighbor Addr Interface Uptime Expiry Time DR
(hh:mm:ss) (hh:mm:ss) Priority
--------------- --------- ----------- ----------- --------
192.168.10.2 1/0/1 00:02:55 00:01:15 NA
(Switch) #show ip pim neighbor
Neighbor Addr Interface Uptime Expiry Time DR
(hh:mm:ss) (hh:mm:ss) Priority
--------------- --------- ----------- ----------- --------
192.168.10.2 1/0/1 00:02:55 00:01:15 1
192.168.20.2 1/0/2 00:03:50 00:02:10 1

ip pim sparse(Global Config)

This command is used to administratively enable PIM Sparse Mode (PIM-SM) multicast
routing mode on the router.
Default
disabled
Format
ip pim sparse
Mode
Global Config
ProSafe Managed Switch
IP Multicast Commands
330