Show Diffserv; Show Class-Map - NETGEAR ProSafe M7100-24X User Manual

show class-map

This command displays all configuration information for the specified class. The
<class-name> is the name of an existing DiffServ class.
Format
show class-map <class-name>
Modes
• Privileged EXEC
• User EXEC
If the class-name is specified the following fields are displayed:
Term Definition
Class Name
The name of this class.
Class Type
A class type of 'all' means every match criterion defined for the class is evaluated
simultaneously and must all be true to indicate a class match.
Class Layer3
The Layer 3 protocol for this class. Possible values are IPv4 and IPv6.
Protocol
Match Criteria
The Match Criteria fields are only displayed if they have been configured. Not all
platforms support all match criteria values. They are displayed in the order entered by the
user. The fields are evaluated in accordance with the class type. The possible Match
Criteria fields are: Destination IP Address, Destination Layer 4 Port, Destination MAC
Address, Ethertype, Source MAC Address, VLAN, Class of Service, Every, IP DSCP, IP
Precedence, IP TOS, Protocol Keyword, Reference Class, Source IP Address, and
Source Layer 4 Port.
Values
The values of the Match Criteria.
If you do not specify the Class Name, this command displays a list of all defined DiffServ
classes. The following fields are displayed:
Term Definition
Class Name
The name of this class. (Note that the order in which classes are displayed is not
necessarily the same order in which they were created.)
Class Type
A class type of 'all' means every match criterion defined for the class is evaluated
simultaneously and must all be true to indicate a class match.
Reference
The name of an existing DiffServ class whose match conditions are being referenced by
Class Name
the specified class definition.

show diffserv

This command displays the DiffServ General Status Group information, which includes the
current administrative mode setting as well as the current and maximum number of rows in
each of the main DiffServ private MIB tables. This command takes no options.
Format
show diffserv
Mode
Privileged EXEC
ProSafe Managed Switch
Quality of Service (QoS) Commands
464