Switchport Mode Private-Vlan - NETGEAR ProSafe M7100-24X User Manual

Term Definition
host-association
Defines VLAN association for community or host ports.
mapping
Defines the private VLAN mapping for promiscuous ports.
primary-vlan-id
Primary VLAN ID of a private VLAN.
secondary-vlan-id
Secondary (isolated or community) VLAN ID of a private VLAN.
add
Associates the secondary VLAN with the primary one.
remove
Deletes the secondary VLANs from the primary VLAN association.
secondary-vlan-list
A list of secondary VLANs to be mapped to a primary VLAN.
no switchport private-vlan
This command is used to remove the private-VLAN association or mapping from the port.
Format
no switchport private-vlan {host-association | mapping}
Mode
Interface Config

switchport mode private-vlan

This command is used to configure a port as a promiscuous or host private VLAN port. Note
that the properties of each mode can be configured even when the switch is not in that mode.
However, they will only be applicable once the switch is in that particular mode.
Format
switchport mode private-vlan {host | promiscuous}
Mode
Interface Config
Default
General
Term Definition
host
Configures an interface as a private VLAN host port. It can be either isolated or
community port depending on the secondary VLAN it is associated with.
promiscuous
Configures an interface as a private VLAN promiscuous port. The promiscuous ports
are members of the primary VLAN.
no switchport mode
This command is used to remove the private-VLAN association or mapping from the port.
Format
no switchport mode private-vlan
Mode
Interface Config
ProSafe Managed Switch
Switching Commands
68