Show Ip Dvmrp Interface; Show Ip Dvmrp Neighbor - NETGEAR ProSafe M7100-24X User Manual

Term Definition
Interface-Mode
The mode of this interface. Possible values are Enabled and Disabled.
Operational-stat
The current state of DVMRP on this interface. Possible values are Operational or
us
Non-Operational.

show ip dvmrp interface

This command displays the interface information for DVMRP on the specified interface.
Format
show ip dvmrp interface <unit/slot/port>
Modes
• Privileged EXEC
• User EXEC
Term Definition
Interface Mode
Indicates whether DVMRP is enabled or disabled on the specified interface.
Metric
The metric of this interface. This is a configured value.
Local Address
The IP address of the interface.
The following field is displayed only when DVMRP is operational on the interface.
Term Definition
Generation ID
The Generation ID value for the interface. This is used by the neighboring routers to
detect that the DVMRP table should be resent.
The following fields are displayed only if DVMRP is enabled on this interface.
Term Definition
Received Bad
The number of invalid packets received.
Packets
Received Bad
The number of invalid routes received.
Routes
Sent Routes
The number of routes that have been sent on this interface.

show ip dvmrp neighbor

This command displays the neighbor information for DVMRP.
Format
show ip dvmrp neighbor
Modes
• Privileged EXEC
• User EXEC
ProSafe Managed Switch
IP Multicast Commands
325