Utilities - NETGEAR ProSafe M7100-24X User Manual

Utilities

Table 6. Trap Mgr Log Message
Component Message
Trap Mgr
Link Up/Down: unit/slot/port
Table 7. DHCP Filtering Log Messages
Component Message
DHCP Filtering
Unable to create r/w lock for DHCP
Filtering
DHCP Filtering
Failed to register with nv Store.
DHCP Filtering
Failed to register with NIM
DHCP Filtering
Error on call to sysapiCfgFileWrite file
Table 8. NVStore Log Messages
Component Message
NVStore
Building defaults for file XXX
NVStore
Error on call to osapiFsWrite routine on file
XXX
NVStore
File XXX corrupted from file system.
Checksum mismatch.
NVStore
Migrating config file XXX from version Y to
Z
ProSafe Managed Switch
Cause
An interface changed link state.
Cause
Unable to create semaphore used for dhcp
filtering configuration structure .
Unable to register save and restore
functions for configuration save
Unable to register with NIM for interface
callback functions
Error on trying to save configuration .
Cause
A component's configuration file does not
exist or the file's checksum is incorrect so
the component's default configuration file is
built.
Either the file cannot be opened or the OS's
file I/O returned an error trying to write to
the file.
The calculated checksum of a component's
configuration file in the file system did not
match the checksum of the file in memory.
A configuration file version mismatch was
detected so a configuration file migration
has started.
Log Messages
702