Logging Host Remove; Logging Syslog; Show Logging; Logging Syslog Source-Interface - NETGEAR ProSafe M7100-24X User Manual

logging host remove

This command disables logging to host. See
indexes.
Format
logging host remove <hostindex>
Mode
Global Config

logging syslog

This command enables syslog logging. The <portid> parameter is an integer with a range
of 1-65535.
Default
disabled
Format
logging syslog [port <portid>]
Mode
Global Config
no logging syslog
This command disables syslog logging.
Format
no logging syslog
Mode
Global Config

logging syslog source-interface

This command configures the syslog source-interface.
Format
logging syslog source-interface {<u/s/p> | {loopback <loopback-id>}
| {tunnel <tunnel-id>}}
Mode
Global Config

show logging

This command displays logging configuration information.
Format
show logging
Mode
Privileged EXEC
Term Definition
Logging Client
Port on the collector/relay to which syslog messages are sent.
Local Port
CLI Command
Shows whether CLI Command logging is enabled.
Logging
Console
Shows whether console logging is enabled.
Logging
ProSafe Managed Switch
show logging hosts
Utility Commands
531
on page 532 for a list of host