Snmp-Server Community Ro; Snmp-Server Community Rw; Snmp-Server Enable Traps Violation - NETGEAR ProSafe M7100-24X User Manual

no snmp-server community mode
Use this command to deactivate an SNMP community. If the community is disabled, no
SNMP requests using this community are accepted. In this case the SNMP manager
associated with this community cannot manage the switch until the Status is changed back to
Enable.
Format
no snmp-server community mode <name>
Mode
Global Config

snmp-server community ro

Use this command to restrict access to switch information. The access mode is read-only
(also called public).
Format
snmp-server community ro <name>
Mode
Global Config

snmp-server community rw

Use this command to restrict access to switch information. The access mode is read/write
(also called private).
Format
snmp-server community rw <name>
Mode
Global Config

snmp-server enable traps violation

Use this command to enable sending new violation traps designating when a packet with a
disallowed MAC address is received on a locked port.
Note: For other port security commands, see
on page 64.
Default
disabled
Format
snmp-server enable traps violation
Mode
Interface Config
ProSafe Managed Switch
Protected Ports Commands
Management Commands
664