NETGEAR ProSafe M7100-24X User Manual page 604

RFC 2819
• Group 1 - Statistics
Contains cumulative traffic and error statistics.
• Group 2 - History
Generates reports from periodic traffic sampling that are useful for analyzing trends. This
group includes History Control Group and Ethernet History Group.
• Group 3 - Alarm
Enables the definition and setting of thresholds for various counters. Thresholds can be
passed in either a rising or falling direction on existing MIB objects, primarily those in the
Statistics group. An alarm is triggered when a threshold is crossed and the alarm is
passed to the Event group. The Alarm requires the Event Group.
• Group 9 - Event
Controls the actions that are taken when an event occurs. RMON events occur when:
• A threshold (alarm) is exceeded
• There is a match on certain filters.
RFC 3273
• Group 1 - Media Independent Group
Contains media-independent statistics that provide information for full and/or half-duplex
links as well as high capacity links.
• Group 2 - Ether Stats High Capacity Group
Contains the High Capacity RMON extensions to RMON-1 etherStatsTable (RFC 2819
Group 1).
• Group 3 - Ether History High Capacity Group
Contains the High Capacity RMON extensions to RMON-1 etherHistoryTable (RFC 2819
Group 2).
RFC 3434
• Group 1 - High Capacity Alarm Control Group
Controls the configuration of alarms for high capacity MIB object instances.
• Group 2 - High Capacity Alarm Capabilities Group
Describes the high capacity alarm capabilities provided by the agent.
• Group 3 - High Capacity Alarm Notifications Group
Provides new rising and falling threshold notifications for high capacity objects.
ProSafe Managed Switch
Utility Commands
604