Aaa Authorization - NETGEAR ProSafe M7100-24X User Manual

aaa authorization

This command creates an authorization method list. This list is identified by "default" or a
user-specified "list_name." If "tacacs" is specified as the Authorization method, Authorization
commands are notified to a TACACS+ server. If "none" is specified as the Authorization
method, command authorization is not applicable. A maximum of 5 Authorization Method
Lists can be created for "commands" type.
Note: Local method is not supported for command Authorization. Also
note that command authorization with RADIUS works if and only if
the applied authentication method is also radius.
Format
aaa authorization {commands | exec } {default | <list_name>}
method1[method2]
Mode
Global Config
Term Definition
commands
Alphanumeric character string used to name the list of authorization methods.
Exec
The default list of methods for authorization services.
default
The default list of methods for authorization services.
list-name
Alphanumeric character string used to name the list of authorization methods.
method
TACACS+/RADIUS/Local and none are supported.
no aaa authorization
This command deletes the authorization method list.
Format
no aaa authorization {commands | exec } {default | <list_name>}
method1[method2]
Mode
Global Config
authorization(console/telnet/ssh)
To apply the command authorization method list to an access method (console/telnet/ssh).
Apply this command in the line configuration mode.
Format
authorization {commands | exec }[default |<list_name>]
Mode
• Line console
• Line telnet
• Line SSH
ProSafe Managed Switch
Management Commands
655