Isdp Commands; Show Mac-Address-Table Stats; Isdp Run - NETGEAR ProSafe M7100-24X User Manual

Term Definition
MAC Address
A multicast MAC address for which the switch has forwarding and or filtering information.
The format is two-digit hexadecimal numbers separated by colons, for example
01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as a MAC
address and VLAN ID combination of 8 bytes.
Type
The type of the entry. Static entries are those that are configured by the end user.
Dynamic entries are added to the table as a result of a learning process or protocol.
Component
The component that is responsible for this entry in the Multicast Forwarding Database.
Possible values are IGMP Snooping, GMRP, and Static Filtering.
Description
The text description of this multicast table entry.
Interfaces
The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
Forwarding
The resultant forwarding list is derived from combining all the component's forwarding
Interfaces
interfaces and removing the interfaces that are listed as the static filtering interfaces.

show mac-address-table stats

This command displays the Multicast Forwarding Database (MFDB) statistics.
Format
show mac-address-table stats
Mode
Privileged EXEC
Term Definition
Max MFDB
The total number of entries that can possibly be in the Multicast Forwarding Database
Table Entries
table.
Most MFDB
The largest number of entries that have been present in the Multicast Forwarding
Entries Since
Database table. This value is also known as the MFDB high-water mark.
Last Reset
Current Entries
The current number of entries in the MFDB.

ISDP Commands

This section describes the commands you use to configure the industry standard Discovery
Protocol (ISDP).

isdp run

This command enables ISDP on the switch.
Default
Enabled
Format
isdp run
Mode
Global Config
ProSafe Managed Switch
Switching Commands
201