Sntp Client Port; Sntp Unicast Client Poll-Interval; Sntp Unicast Client Poll-Timeout - NETGEAR ProSafe M7100-24X User Manual

no sntp client mode
This command disables Simple Network Time Protocol (SNTP) client mode.
Format
no sntp client mode
Mode
Global Config

sntp client port

This command sets the SNTP client port id to a value from 1-65535.
Default
123
Format
sntp client port <portid>
Mode
Global Config
no sntp client port
This command resets the SNTP client port back to its default value.
Format
no sntp client port
Mode
Global Config

sntp unicast client poll-interval

This command sets the poll interval for SNTP unicast clients in seconds as a power of two
where <poll-interval> can be a value from 6 to 10.
Default
6
Format
sntp unicast client poll-interval <poll-interval>
Mode
Global Config
no sntp unicast client poll-interval
This command resets the poll interval for SNTP unicast clients to its default value.
Format
no sntp unicast client poll-interval
Mode
Global Config

sntp unicast client poll-timeout

This command will set the poll timeout for SNTP unicast clients in seconds to a value from
1-30.
Default
5
ProSafe Managed Switch
Utility Commands
551