Show Switchport Protected; Show Interfaces Switchport - NETGEAR ProSafe M7100-24X User Manual

Default
unprotected
Format
switchport protected <groupid>
Mode
Interface Config
no switchport protected (Interface Config)
Use this command to configure a port as unprotected. The groupid parameter identifies the
set of protected ports to which this interface is assigned.
Format
no switchport protected <groupid>
Mode
Interface Config

show switchport protected

This command displays the status of all the interfaces, including protected and unprotected
interfaces.
Format
show switchport protected <groupid>
Mode
• Privileged EXEC
• User EXEC
Term Definition
Group ID
The number that identifies the protected port group.
Name
An optional name of the protected port group. The name can be up to 32 alphanumeric
characters long, including blanks. The default is blank.
List of Physical
List of ports, which are configured as protected for the group identified with <groupid>. If
Ports
no port is configured as protected for this group, this field is blank.

show interfaces switchport

This command displays the status of the interface (protected/unprotected) under the groupid.
Format
show interfaces switchport <unit/slot/port> <groupid>
Mode
• Privileged EXEC
• User EXEC
Term Definition
Name
A string associated with this group as a convenience. It can be up to 32 alphanumeric
characters long, including blanks. The default is blank. This field is optional.
Protected port
Indicates whether the interface is protected or not. It shows TRUE or FALSE. If the group
is a multiple groups then it shows TRUE in Group <groupid>.
ProSafe Managed Switch
Switching Commands
66