Arp Cachesize; Arp Dynamicrenew - NETGEAR ProSafe M7100-24X User Manual

address is reachable. The device only responds if all next hops in its route to the destination
are through interfaces other than the interface that received the ARP request.
Default
enabled
Format
ip proxy-arp
Mode
Interface Config
no ip proxy-arp
This command disables proxy ARP on a router interface.
Format
no ip proxy-arp
Mode
Interface Config

arp cachesize

This command configures the ARP cache size. The ARP cache size value is a platform
specific integer value. The default size also varies depending on the platform.
Format
arp cachesize <platform specific integer value>
Mode
Global Config
no arp cachesize
This command configures the default ARP cache size.
Format
no arp cachesize
Mode
Global Config

arp dynamicrenew

This command enables the ARP component to automatically renew dynamic ARP entries
when they age out.
Default
enabled
Format
arp dynamicrenew
Mode
Privileged EXEC
no arp dynamicrenew
This command prevents dynamic ARP entries from renewing when they age out.
Format
no arp dynamicrenew
Mode
Privileged EXEC
ProSafe Managed Switch
Routing Commands
219