Show Lacp Actor; Show Lacp Partner; Port-Channel System Priority - NETGEAR ProSafe M7100-24X User Manual

port-channel system priority

Use this command to configure port-channel system priority. The valid range of <priority> is
0-65535.
Default
0x8000
Format
port-channel system priority <priority>
Mode
Global Config
no port-channel system priority
Use this command to configure the default port-channel system priority value.
Format
no port-channel system priority
Mode
Global Config

show lacp actor

Use this command to display LACP actor attributes.
Format
show lacp actor {<unit/slot/port>|all}
Mode
Global Config
The following output parameters are displayed.
Parameter Description
System Priority
The system priority assigned to the Aggregation Port.
Admin Key
The administrative value of the Key.
Port Priority
The priority value assigned to the Aggregation Port.
Admin State
The administrative values of the actor state as transmitted by the Actor in LACPDUs.

show lacp partner

Use this command to display LACP partner attributes.
Format
show lacp partner {<unit/slot/port>|all}
Mode
Privileged EXEC
ProSafe Managed Switch
Switching Commands
117