Show Captive-Portal Status - NETGEAR ProSafe M7100-24X User Manual

Operational Status........................ Disabled
Disable Reason............................ Administrator Disabled
CP IP Address................. 1.2.3.4

show captive-portal status

Use this command to report the status of all captive portal instances in the system.
Format
show captive-portal status
Mode
Privileged EXEC mode
Term Definition
Additional HTTP
The additional HTTP port for captive portal to monitor. Captive portal only monitors port
Port
80 by default.
Additional HTTP
The additional HTTPs port for captive portal to monitor. Captive portal only monitors
Secure Port
port 443 by default.
Peer Switch Statistics Reporting Interval
Authentication
The timeout for the authentication page to be served again.
Timeout
Supported
The maximum number of captive portal instances supported by switch. It supports up
Captive Portals
to 10 instances.
Configured
The number of created captive portal instances.
Captive Portals
Active Captive
The number of active captive portal instances.
Portals
System
The maximum number of user can be authenticated.
Supported Users
Local Supported
The maximum number of local user can be created.
Users
Authenticated
The number of the authenticated users.
Users
Example
(switch)#show captive-portal status
Additional HTTP Port........................... 0
Additional HTTP Secure Port.................... 0
Peer Switch Statistics Reporting Interval...... 120
Authentication Timeout......................... 300
Supported Captive Portals...................... 10
Configured Captive Portals..................... 1
Active Captive Portals......................... 0
System Supported Users......................... 1024
Local Supported Users.......................... 128
Authenticated Users............................ 0
ProSafe Managed Switch
Captive Portal Commands
728