Spanning-Tree Tcnguard; Spanning-Tree Max-Age; Spanning-Tree Max-Hops - NETGEAR ProSafe M7100-24X User Manual

spanning-tree tcnguard

This command enables the propagation of received topology change notifications and topology
changes to other ports.
Default
disable
Format
spanning-tree tcnguard
Mode
Interface Config
no spanning-tree tcnguard
This command disables the propagation of received topology change notifications and topology
changes to other ports.
Format
no spanning-tree tcnguard
Mode
Interface Config

spanning-tree max-age

This command sets the Bridge Max Age parameter to a new value for the common and
internal spanning tree. The max-age value is in seconds within a range of 6 to 40, with the
value being less than or equal to 2 x (Bridge Forward Delay - 1).
Default
20
Format
spanning-tree max-age <6-40>
Mode
Global Config
no spanning-tree max-age
This command sets the Bridge Max Age parameter for the common and internal spanning
tree to the default value.
Format
no spanning-tree max-age
Mode
Global Config

spanning-tree max-hops

This command sets the MSTP Max Hops parameter to a new value for the common and
internal spanning tree. The max-hops value is a range from 6 to 40.
Default
20
Format
spanning-tree max-hops <1-127>
Mode
Global Config
ProSafe Managed Switch
Switching Commands
34