spanning-tree port mode
This command sets the Administrative Switch Port State for this port to enabled.
Default
enabled
Format
spanning-tree port mode
Mode
Interface Config
no spanning-tree port mode
This command sets the Administrative Switch Port State for this port to disabled.
Format
no spanning-tree port mode
Mode
Interface Config
spanning-tree port mode all
This command sets the Administrative Switch Port State for all ports to enabled.
Default
enabled
Format
spanning-tree port mode all
Mode
Global Config
no spanning-tree port mode all
This command sets the Administrative Switch Port State for all ports to disabled.
Format
no spanning-tree port mode all
Mode
Global Config
spanning-tree edgeport all
This command specifies that every port is an Edge Port within the common and internal
spanning tree. This allows all ports to transition to Forwarding State without delay.
Format
spanning-tree edgeport all
Mode
Global Config
no spanning-tree edgeport all
This command disables Edge Port mode for all ports within the common and internal
spanning tree.
Format
no spanning-tree edgeport all
Mode
Global Config
ProSafe Managed Switch
Switching Commands
38