Bootpdhcprelay Maxhopcount; Bootpdhcprelay Minwaittime; Show Bootpdhcprelay - NETGEAR ProSafe M7100-24X User Manual

bootpdhcprelay maxhopcount

This command configures the maximum allowable relay agent hops for BootP/DHCP Relay
on the system. The <hops> parameter has a range of 1 to 16.
Default
4
Format
bootpdhcprelay maxhopcount <1-16>
Mode
Global Config
no bootpdhcprelay maxhopcount
This command configures the default maximum allowable relay agent hops for BootP/DHCP
Relay on the system.
Format
no bootpdhcprelay maxhopcount
Mode
Global Config

bootpdhcprelay minwaittime

This command configures the minimum wait time in seconds for BootP/DHCP Relay on the
system. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the
seconds-since-client-began-booting field of the request as a factor in deciding whether to
relay the request or not. The parameter has a range of 0 to 100 seconds.
Default
0
Format
bootpdhcprelay minwaittime <0-100>
Mode
Global Config
no bootpdhcprelay minwaittime
This command configures the default minimum wait time in seconds for BootP/DHCP Relay
on the system.
Format
no bootpdhcprelay minwaittime
Mode
Global Config

show bootpdhcprelay

This command displays the BootP/DHCP Relay information.
Format
show bootpdhcprelay
Modes
• Privileged EXEC
• User EXEC
ProSafe Managed Switch
Routing Commands
254