Show Ipv6 Ospf Interface Stats - NETGEAR ProSafe M7100-24X User Manual

Term Definition
Interface
Valid slot and port number separated by forward slashes.
Admin Mode
States whether OSPF is enabled or disabled on a router interface.
Area ID
The OSPF Area ID for the specified interface.
Router Priority
The router priority. The router priority determines which router is the designated router.
Hello Interval
The frequency, in seconds, at which the interface sends Hello packets.
Dead Interval
The amount of time, in seconds, the interface waits before assuming a neighbor is down.
Retransmit
The frequency, in seconds, at which the interface sends LSA.
Interval
Retransmit
The number of seconds the interface adds to the age of LSA packets before
Delay Interval
transmission.
LSA Ack
The amount of time, in seconds, the interface waits before sending an LSA
Interval
acknowledgement after receiving an LSA.

show ipv6 ospf interface stats

This command displays the statistics for a specific interface. The command only displays
information if OSPF is enabled.
Format
show ipv6 ospf interface stats <unit/slot/port>
Modes
• Privileged EXEC
• User EXEC
Term Definition
OSPFv3 Area ID The area id of this OSPF interface.
IPv6 Address
The IP address associated with this OSPF interface.
OSPFv3
The number of times the specified OSPF interface has changed its state, or an error has
Interface Events
occurred.
Virtual Events
The number of state changes or errors that occurred on this virtual link.
Neighbor
The number of times this neighbor relationship has changed state, or an error has
Events
occurred.
Packets
The number of OSPFv3 packets received on the interface.
Received
Packets
The number of OSPFv3 packets sent on the interface.
Transmitted
LSAs Sent
The total number of LSAs flooded on the interface.
ProSafe Managed Switch
IPv6 Commands
402