Ip Http Secure-Session Soft-Timeout; Ip Http Secure-Session Hard-Timeout - NETGEAR ProSafe M7100-24X User Manual

no ip http secure-session maxsessions
Use this command to restore the number of allowable secure HTTP sessions to the default
value.
Format
no ip http secure-session maxsessions
Mode
Privileged EXEC

ip http secure-session soft-timeout

Use this command to configure the soft timeout for secure HTTP sessions in minutes.
Configuring this value to zero will give an infinite soft-timeout. When this timeout expires, you
are forced to re-authenticate. This timer begins on initiation of the Web session and is
re-started with each access to the switch. The secure-session soft-timeout can not be set to
zero (infinite).
Default
5
Format
ip http secure-session soft-timeout <1-60>
Mode
Privileged EXEC
no ip http secure-session soft-timeout
Use this command to restore the soft timeout for secure HTTP sessions to the default value.
Format
no ip http secure-session soft-timeout
Mode
Privileged EXEC

ip http secure-session hard-timeout

Use this command to configure the hard timeout for secure HTTP sessions in hours. When
the timeout expires, the user is forced to re-authenticate. This timer begins on initiation of the
Web session and is unaffected by the activity level of the connection. The secure-session
hard-timeout can not be set to zero (infinite).
Default 24
Format
ip http secure-session hard-timeout <1-168>
Mode
Privileged EXEC
no ip http secure-session hard-timeout
Use this command to reset the hard timeout for secure HTTP sessions to the default value.
Format
no ip http secure-session hard-timeout
Mode
Privileged EXEC
ProSafe Managed Switch
Management Commands
634