Show Ipv6 Ospf Interface Brief - NETGEAR ProSafe M7100-24X User Manual

Term Definition
OSPF Area ID
The area ID associated with this interface.
Router Priority
The router priority. The router priority determines which router is the designated router.
Retransmit
The frequency, in seconds, at which the interface sends LSA.
Interval
Hello Interval
The frequency, in seconds, at which the interface sends Hello packets.
Dead Interval
The amount of time, in seconds, the interface waits before assuming a neighbor is down.
LSA Ack
The amount of time, in seconds, the interface waits before sending an LSA
Interval
acknowledgement after receiving an LSA.
Iftransit Delay
The number of seconds the interface adds to the age of LSA packets before
Interval
transmission.
Authentication
The type of authentication the interface performs on LSAs it receives.
Type
Metric Cost
The priority of the path. Low costs have a higher priority than high costs.
Passive Status
Shows whether the interface is passive or not.
OSPF
Shows whether to ignore MTU mismatches in database descriptor packets sent from
MTU-ignore
neighboring routers.
The following information only displays if OSPF is initialized on the interface:
Term Definition
OSPF Interface
Broadcast LANs, such as Ethernet and IEEE 802.5, take the value broadcast. The OSPF
Type
Interface Type will be 'broadcast'.
State
The OSPF Interface States are: down, loopback, waiting, point-to-point, designated
router, and backup designated router.
Designated
The router ID representing the designated router.
Router
Backup
The router ID representing the backup designated router.
Designated
Router
Number of Link
The number of link events.
Events
Metric Cost
The cost of the OSPF interface.

show ipv6 ospf interface brief

This command displays brief information for the IFO object or virtual interface tables.
Format
show ipv6 ospf interface brief
Modes
• Privileged EXEC
• User EXEC
ProSafe Managed Switch
IPv6 Commands
401