Show Ip Igmp-Proxy Interface - NETGEAR ProSafe M7100-24X User Manual

Term Definition
Number of
The number of multicast groups that are associated with the IGMP Proxy interface.
Multicast
Groups
Unsolicited
The time interval at which the IGMP Proxy interface sends unsolicited group membership
Report Interval
report.
Querier IP
The IP address of the Querier, if any, in the network attached to the upstream interface
Address on
(IGMP-Proxy interface).
Proxy Interface
Older Version 1
The interval used to timeout the older version 1 queriers.
Querier Timeout
Older Version 2
The interval used to timeout the older version 2 queriers.
Querier Timeout
Proxy Start
The number of times the IGMP Proxy has been stopped and started.
Frequency
Example: The following example shows CLI display output for the command.
(Switch) #show ip igmp-proxy
Interface Index............................................. 1/0/1
Admin Mode................................................ Enable
Operational Mode......................................... Enable
Version......................................................... 3
Num of Multicast Groups............................. 0
Unsolicited Report Interval.......................... 1
Querier IP Address on Proxy Interface........ 5.5.5.50
Older Version 1 Querier Timeout................ 0
Older Version 2 Querier Timeout................ 00::00:00
Proxy Start Frequency................................. 1

show ip igmp-proxy interface

This command displays a detailed list of the host interface status parameters. It displays the
following parameters only when you enable IGMP Proxy.
Format
show ip igmp-proxy interface
Modes
• Privileged EXEC
• User EXEC
Term Definition
Interface Index
The unit/slot/port of the IGMP proxy.
The column headings of the table associated with the interface are as follows:
ProSafe Managed Switch
IP Multicast Commands
347