Dos-Control Tcpoffset; Dos-Control Tcpsyn - NETGEAR ProSafe M7100-24X User Manual

no dos-control tcpflagseq
This command sets disables TCP Flag and Sequence Denial of Service protection.
Format
no dos-control tcpflagseq
Mode
Global Config

dos-control tcpoffset

This command enables TCP Offset Denial of Service protection. If the mode is enabled,
Denial of Service prevention is active for this type of attack. If packets ingress having TCP
Header Offset equal to one (1), the packets will be dropped if the mode is enabled.
Default
disabled
Format
dos-control tcpoffset
Mode
Global Config
no dos-control tcpoffset
This command disabled TCP Offset Denial of Service protection.
Format
no dos-control tcpoffset
Mode
Global Config

dos-control tcpsyn

This command enables TCP SYN and L4 source = 0-1023 Denial of Service protection. If the
mode is enabled, Denial of Service prevention is active for this type of attack. If packets
ingress having TCP flag SYN set and an L4 source port from 0 to 1023, the packets will be
dropped if the mode is enabled.
Default
disabled
Format
dos-control tcpsyn
Mode
Global Config
no dos-control tcpsyn
This command sets disables TCP SYN and L4 source = 0-1023 Denial of Service protection.
Format
no dos-control tcpsyn
Mode
Global Config
ProSafe Managed Switch
Switching Commands
196