Domain-Name Enable; Mac Address-Table Multicast Forbidden-Unregistered Vlan - NETGEAR ProSafe M7100-24X User Manual

username, then the managed switch sends the username input as the domain-name(as
entered by the user)\username to the RADIUS server.
• Domain disabled: In this case, the domain name is not included when the user-name is
sent to the RADIUS server.
Note: If the user domain is already provided by the user/supplicant, the
domain name is assumed to reach the managed switch along with
the username in the following format:
"Domainname \username"
Format
domain-name <name>
Mode
Global Config
no domain-name
This command is used to disable the domain-name in the managed switch.
Format
no domain-name
Mode
Global Config

domain-name enable

This command enables the domain name functionality.
Format
domain-name enable
Mode
Global Config
no domain-name enable
This command disables the domain name functionality.
Format
no domain-name enable
Mode
Global Config

mac address-table multicast forbidden-unregistered vlan

Use this command to forbid forwarding unregistered multicast addresses (in other words,
unknown multicast traffic) on a given VLAN ID.
Default
Disabled
ProSafe Managed Switch
Management Commands
657