Ip Irdp Multicast; Ip Irdp Holdtime; Ip Irdp Maxadvertinterval - NETGEAR ProSafe M7100-24X User Manual

ip irdp multicast

This command configures the address that the interface uses to send the router discovery
advertisements. The address is 224.0.0.1, which is the all-hosts IP multicast address.
Default
224.0.0.1
Format
ip irdp multicast
Mode
Interface Config
no ip irdp multicast
This command configures the address used to advertise the router to the Broadcast address
(255.255.255.155)..
Format
no ip irdp multicast
Mode
Interface Config

ip irdp holdtime

This command configures the value, in seconds, of the holdtime field of the router
advertisement sent from this interface. The holdtime range is the value of
<maxadvertinterval> to 9000 seconds.
Default
3 * maxinterval
Format
ip irdp holdtime <maxadvertinterval-9000>
Mode
Interface Config
no ip irdp holdtime
This command configures the default value, in seconds, of the holdtime field of the router
advertisement sent from this interface.
Format
no ip irdp holdtime
Mode
Interface Config

ip irdp maxadvertinterval

This command configures the maximum time, in seconds, allowed between sending router
advertisements from the interface. The range for maxadvertinterval is 4 to 1800 seconds.
Default
600
Format
ip irdp maxadvertinterval <4-1800>
Mode
Interface Config
ProSafe Managed Switch
Routing Commands
241