Show Ip Mcast Mroute Group - NETGEAR ProSafe M7100-24X User Manual

If you use the detail parameter, the command displays the following fields:
Term Definition
Source IP
The IP address of the multicast data source.
Group IP
The IP address of the destination of the multicast packet.
Expiry Time
The time of expiry of this entry in seconds.
Up Time
The time elapsed since the entry was created in seconds.
RPF Neighbor
The IP address of the RPF neighbor.
Flags
The flags associated with this entry.
If you use the summary parameter, the command displays the following fields:
Term Definition
Source IP
The IP address of the multicast data source.
Group IP
The IP address of the destination of the multicast packet.
Protocol
The multicast routing protocol by which the entry was created.
Incoming
The interface on which the packet for the source/group
Interface
arrives.
Outgoing
The list of outgoing interfaces on which the packet
Interface List
is forwarded.

show ip mcast mroute group

This command displays the multicast configuration settings such as flags, timer settings,
incoming and outgoing interfaces, RPF neighboring routers, and expiration times of all the
entries in the multicast mroute table containing the given <groupipaddr>.
Format
show ip mcast mroute group <groupipaddr> {detail |summary}
Modes
• Privileged EXEC
• User EXEC
Term Definition
Source IP
The IP address of the multicast data source.
Group IP
The IP address of the destination of the multicast packet.
Protocol
The multicast routing protocol by which this entry was created.
Incoming
The interface on which the packet for this group arrives.
Interface
Outgoing
The list of outgoing interfaces on which this packet is forwarded.
Interface List
ProSafe Managed Switch
IP Multicast Commands
321