Vlan Acceptframe; Vlan Ingressfilter - NETGEAR M6100 Series Reference Manual

no vlan
This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1
is reserved for the default VLAN). The VLAN number is in the range 2–4093.
Format
no vlan number
Mode VLAN Config

vlan acceptframe

This command sets the frame acceptance mode on an interface or range of interfaces. For
VLAN Only mode, untagged frames or priority frames received on this interface are
discarded. For Admit All mode, untagged frames or priority frames received on this interface
are accepted and assigned the value of the interface VLAN ID for this port. For
admituntaggedonly mode, only untagged frames are accepted on this interface; tagged
frames are discarded. With any option, VLAN tagged frames are forwarded in accordance
with the IEEE 802.1Q VLAN Specification.
Default all
Format
vlan acceptframe {admituntaggedonly | vlanonly | all}
Mode Interface Config
no vlan acceptframe
This command resets the frame acceptance mode for the interface or range of interfaces to
the default value.
Format
no vlan acceptframe
Mode Interface Config

vlan ingressfilter

This command enables ingress filtering on an interface or range of interfaces. If ingress
filtering is disabled, frames received with VLAN IDs that do not match the VLAN membership
of the receiving interface are admitted and forwarded to ports that are members of that
VLAN.
Default disabled
Format
vlan ingressfilter
Mode Interface Config
M6100 Series Switches
Switching Commands
363