NETGEAR ProSafe M7100-24X User Manual page 87

Term Definition
Reauthentication
The timer used by the authenticator state machine on this port to determine when
Period
reauthentication of the supplicant takes place. The value is expressed in seconds and
will be in the range of 1 and 65535.
Reauthentication
Indicates if reauthentication is enabled on this port. Possible values are 'True" or
Enabled
"False".
Key
Indicates if the key is transmitted to the supplicant for the specified port. Possible values
Transmission
are True or False.
Enabled
Control Direction The control direction for the specified port or ports. Possible values are both or in.
Maximum Users
The maximum number of clients that can get authenticated on the port in the
MAC-based dot1x authentication mode. This value is used only when the port control
mode is not MAC-based.
Unauthenticated
Indicates the unauthenticated VLAN configured for this port. This value is valid for the
VLAN ID
port only when the port control mode is not MAC-based.
Session Timeout Indicates the time for which the given session is valid. The time period in seconds is
returned by the RADIUS server on authentication of the port. This value is valid for the
port only when the port control mode is not MAC-based.
Session
This value indicates the action to be taken once the session timeout expires. Possible
Termination
values are Default, Radius-Request. If the value is Default, the session is terminated
Action
the port goes into unauthorized state. If the value is Radius-Request, then a
reauthentication of the client authenticated on the port is performed. This value is valid
for the port only when the port control mode is not MAC-based.
The
show dot1x detail <unit/slot/port>
MAC-based dot1x fields if the port-control mode for that specific port is MAC-based. For each
client authenticated on the port, the
display the following MAC-based dot1x parameters if the port-control mode for that specific
port is MAC-based.
Term Definition
Supplicant
The MAC-address of the supplicant.
MAC-Address
Authenticator
Current state of the authenticator PAE state machine. Possible values are Initialize,
PAE State
Disconnected, Connecting, Authenticating, Authenticated, Aborting, Held,
ForceAuthorized, and ForceUnauthorized.
Backend
Current state of the backend authentication state machine. Possible values are Request,
Authentication
Response, Success, Fail, Timeout, Idle, and Initialize.
State
VLAN-Assigned
The VLAN assigned to the client by the radius server.
Logical Port
The logical port number associated with the client.
ProSafe Managed Switch
command will display the following
show dot1x detail <unit/slot/port>
Switching Commands
87
command will