ip ssh
Use this command to enable SSH access to the system. (This command is the short form of
the ip ssh server enable command.)
Default
disabled
Format
ip ssh
Mode
Privileged EXEC
ip ssh protocol
Use this command to set or remove protocol levels (or versions) for SSH. Either SSH1 (1),
SSH2 (2), or both SSH 1 and SSH 2 (1 and 2) can be set.
Default
1 and 2
Format
ip ssh protocol [1] [2]
Mode
Privileged EXEC
ip ssh server enable
Use this command to enable the IP secure shell server.
Default
disabled
Format
ip ssh server enable
Mode
Privileged EXEC
no ip ssh server enable
Use this command to disable the IP secure shell server.
Format
no ip ssh server enable
Mode
Privileged EXEC
sshcon maxsessions
Use this command to specify the maximum number of SSH connection sessions that can be
established. A value of 0 indicates that no ssh connection can be established. The range is 0
to 5.
Default
5
Format
sshcon maxsessions <0-5>
Mode
Privileged EXEC
ProSafe Managed Switch
Management Commands
627