NETGEAR ProSafe M7100-24X User Manual page 517

Term Definition
(cont) • Packets RX and TX 65–127 Octets - The total number of packets (including bad packets)
received and transmitted that were between 65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets).
• Packets RX and TX 128–255 Octets - The total number of packets (including bad packets)
received and transmitted that were between 128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets).
• Packets RX and TX 256–511 Octets - The total number of packets (including bad packets)
received and transmitted that were between 256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets).
• Packets RX and TX 512–1023 Octets - The total number of packets (including bad
packets) received and transmitted that were between 512 and 1023 octets in length
inclusive (excluding framing bits but including FCS octets).
• Packets RX and TX 1024–1518 Octets - The total number of packets (including bad
packets) received and transmitted that were between 1024 and 1518 octets in length
inclusive (excluding framing bits but including FCS octets).
• Packets RX and TX 1519–1522 Octets - The total number of packets (including bad
packets) received and transmitted that were between 1519 and 1522 octets in length
inclusive (excluding framing bits but including FCS octets).
• Packets RX and TX 1523–2047 Octets - The total number of packets received and
transmitted that were between 1523 and 2047 octets in length inclusive (excluding framing
bits, but including FCS octets) and were otherwise well formed.
• Packets RX and TX 2048–4095 Octets - The total number of packets received that were
between 2048 and 4095 octets in length inclusive (excluding framing bits, but including
FCS octets) and were otherwise well formed.
• Packets RX and TX 4096–9216 Octets - The total number of packets received that were
between 4096 and 9216 octets in length inclusive (excluding framing bits, but including
FCS octets) and were otherwise well formed.
Packets Received • Total Packets Received Without Error - The total number of packets received that were
Successfully without errors.
• Unicast Packets Received - The number of subnetwork-unicast packets delivered to a
higher-layer protocol.
• Multicast Packets Received - The total number of good packets received that were
directed to a multicast address. Note that this number does not include packets directed to
the broadcast address.
• Broadcast Packets Received - The total number of good packets received that were
directed to the broadcast address. Note that this does not include multicast packets.
Receive Packets The number of inbound packets which were chosen to be discarded even though no errors had
Discarded been detected to prevent their being deliverable to a higher-layer protocol. One possible reason
for discarding such a packet could be to free up buffer space.
ProSafe Managed Switch
Utility Commands
517