Show Mbuf Total - NETGEAR ProSafe M7100-24X User Manual

Note: It is not necessarily the traffic to the CPU, but different tasks that
keep the CPU busy.
Format
show process cpu
Mode
Privileged EXEC
The following shows example CLI display output.
(Switch) #show process cpu
Memory Utilization Report
status bytes
------ ----------
free 192980480
alloc 53409968
Task Utilization Report
Task
----------------------- -----------
bcmL2X.0
bcmCNTR.0
bcmLINK.0
DHCP snoop
Dynamic ARP Inspection
dot1s_timer_task
dhcpsPingTask

show mbuf total

This command shows the total system buffer pools status.
Format
show mbuf total
Mode
Privileged EXEC
The following shows an example of CLI display output for the command.
(switch) #show mbuf total
mbufSize 9284 (0x2444)
Current Time 0x1897fa
MbufsFree 150
MbufsRxUsed 0
Total Rx Norm Alloc Attempts
Total Rx Mid2 Alloc Attempts
Total Rx Mid1 Alloc Attempts
Total Rx High Alloc Attempts
Total Tx Alloc Attempts
Total Rx Norm Alloc Failures
Total Rx Mid2 Alloc Failures
ProSafe Managed Switch
Utilization
0.75%
0.20%
0.35%
0.10%
0.10%
0.10%
0.20%
26212
4087
188943
384555
2478536
0
0
Utility Commands
524