Show Vlan Port; Config Vlan Port Pvid; Config Vlan Port Acceptframe - NETGEAR ProSafe GSM7312 User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

show vlan port

This command displays VLAN port information.
Format
Slot.Port
Port VLAN ID
Acceptable Frame Types
Ingress Filtering
GVRP

config vlan port pvid

This command changes the VLAN ID per interface.
Default
Format

config vlan port acceptframe

This command sets the frame acceptance mode per interface. For VLAN Only mode, untagged
frames or priority frames received on this interface are discarded. For Admit All mode, untagged
frames or priority frames received on this interface are accepted and assigned the value of the
interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in
accordance with the IEEE 802.1Q VLAN Specification. VLAN ID range is 1-4094.
Default
7-32
show vlan port <slot.port>
Indicates by slot id and port number which port is controlled by the fields on this
line. It is possible to set the parameters for all ports by using the selectors on the
top line.
The VLAN ID that this port will assign to untagged frames or priority tagged
frames received on this port. The value must be for an existing VLAN. The
factory default is 1.
Specifies the types of frames that may be received on this port. The options are
'VLAN only' and 'Admit All'. When set to 'VLAN only', untagged frames or
priority tagged frames received on this port are discarded. When set to 'Admit
All', untagged frames or priority tagged frames received on this port are
accepted and assigned the value of the Port VLAN ID for this port. With either
option, VLAN tagged frames are forwarded in accordance to the 802.1Q VLAN
specification.
May be enabled or disabled by selecting the corresponding line on the pull-
down entry field. When enabled, the frame is discarded if this port is not a
member of the VLAN with which this frame is associated. In a tagged frame, the
VLAN is identified by the VLAN ID in the tag. In an untagged frame, the
VLAN is the Port VLAN ID specified for the port that received this frame.
When disabled, all frames are forwarded in accordance with the 802.1Q VLAN
bridge specification. The factory default is disabled.
1
config vlan port pvid <1-4094> <slot.port|all>
Admit All
202-10009-01
Switching Commands