Vlan Database; Network Mgmt_Vlan - NETGEAR ProSafe M7100-24X User Manual

vlan database

This command gives you access to the VLAN Config mode, which allows you to configure
VLAN characteristics.
Format
vlan database
Mode
Privileged EXEC

network mgmt_vlan

This command configures the Management VLAN ID.
Default
1
Format
network mgmt_vlan <1-4093>
Mode
Privileged EXEC
no network mgmt_vlan
This command sets the Management VLAN ID to the default.
Format
no network mgmt_vlan
Mode
Privileged EXEC
vlan
This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN
identification number (ID 1 is reserved for the default VLAN). The vlan-list contains VlanId's in
range <1-4093>. Separate non-consecutive IDs with ',' and no spaces and no zeros in
between the range; Use '-' for range.
Format
vlan <vlan-list>
Mode
VLAN Config
no vlan
This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1
is reserved for the default VLAN). The vlan-list contains VlanId's in range <1-4093>.
Separate non-consecutive IDs with ',' and no spaces and no zeros in between the range; Use
'-' for range.
Format
no vlan <vlan-list>
Mode
VLAN Config
ProSafe Managed Switch
Switching Commands
47