User Idle-Timeout; User Max-Bandwidth-Down; User Max-Bandwidth-Up - NETGEAR ProSafe M7100-24X User Manual

user idle-timeout

Use this command to set the session idle timeout value for a captive portal user.
<1-128> is the user ID. The range of idle timeout is 0-900 seconds. 0 indicates use global
configuration.
Default
0
Format
user <1-128> idle-timeout timeout
Mode
Captive Portal Configuration mode
no user idle-timeout
Use this command to reset the idle timeout to the default value.
Format
no user <1-128> idle-timeout timeout
Mode
Captive Portal Configuration mode

user max-bandwidth-down

Use this command to configure the bandwidth at which the client can receive data from the
network. <1-128> is the user ID. The range of bps is <0-536870911> bps. 0 indicates use
global configuration.
Default
0
Format
user <1-128>
Mode
Captive Portal Configuration mode
no user max-bandwidth-down
Use this command to reset the limit to the default.
Format
no user
Mode
Captive Portal Configuration mode

user max-bandwidth-up

Use this command to configure the bandwidth at which the client can send data into the
Network. <1-128> is the user ID. The range of bps is <0-536870911> bps. 0 indicates use
global configuration.
Default
0
Format
user <1-128>
Mode
Captive Portal Configuration mode
ProSafe Managed Switch
max-bandwidth-down bps
<1-128> max-bandwidth-down
max-bandwidth-up bps
Captive Portal Commands
746