Show Ipv6 Mld Interface - NETGEAR ProSafe M7100-24X User Manual

Example: The following shows examples of CLI display output for the commands.
(Switch) #show ipv6 mld groups ?
<group-address>
<unit/slot/port>
(Switch) #show ipv6 mld groups 1/0/1
Group Address.................................. FF43::3
Interface...................................... 1/0/1
Up Time (hh:mm:ss)............................. 00:03:04
Expiry Time (hh:mm:ss)......................... ------
(Switch) #show ipv6 mld groups ff43::3
Interface...................................... 1/0/1
Group Address.................................. FF43::3
Last Reporter.................................. FE80::200:FF:FE00:3
Up Time (hh:mm:ss)............................. 00:02:53
Expiry Time (hh:mm:ss)......................... ------
Filter Mode.................................... Include
Version1 Host Timer............................ ------
Group compat mode.............................. v2
Source Address ExpiryTime
----------------- -----------
2003::10 00:04:17
2003::20 00:04:17

show ipv6 mld interface

Use this command to display MLD-related information for the interface.
Format
show ipv6 mld interface [<unit/slot/port>]
Mode
• Privileged EXEC
• User EXEC
The following information is displayed for each of the interfaces or for only the specified
interface.
Field Description
Interface
The interface number in unit/slot/port format.
MLD Global
Displays the configured administrative status of MLD.
Mode
MLD
The operational status of MLD on the interface.
Operational
Mode
MLD Version
Indicates the version of MLD configured on the interface.
Query Interval
Indicates the configured query interval for the interface.
ProSafe Managed Switch
Enter Group Address Info.
Enter interface in unit/slot/port format.
IPv6 Multicast Commands
431