Network Ipv6 Address; Network Ipv6 Gateway - NETGEAR ProSafe M7100-24X User Manual

network ipv6 address

Use this command to configure an IPv6 global address, enable or disable stateless global
address autoconfiguration, and enable or disable dhcpv6 client protocol information for the
network port. You can configure multiple IPv6 addresses on the network port.
Format
network ipv6 address {
dhcp}
Mode
Privileged EXEC
Term Definition
address
IPv6 prefix in IPv6 global address format.
prefix-length
IPv6 prefix length value.
eui64
Formulate IPv6 address in eui64 format.
autoconfig
Configure stateless global address autoconfiguration capability.
dhcp
Configure dhcpv6 client protocol.
no network ipv6 address
Use this command to:
• Remove the manually configured IPv6 global address on the network port interface (with
the option).
address
• Disable the stateless global address autoconfiguration on the network port (with the
option).
autoconfig
• Disable the dhcpv6 client protocol on the network port (with the
Format
no network ipv6 address {
| dhcp}
Mode
Privileged EXEC

network ipv6 gateway

Use this command to configure IPv6 gateway (default routers) information for the network
port. The gateway address is in IPv6 global or link-local address format.
Format
network ipv6 gateway <gateway-address>
Mode
Privileged EXEC
ProSafe Managed Switch
address/prefix-length
address/prefix-length
Management Commands
695
[eui64] | autoconfig |
option).
dhcp
[eui64] | autoconfig