Ip Http Authentication - NETGEAR ProSafe M7100-24X User Manual

user will be forced to re-authenticate. This timer begins on initiation of the web session and is
unaffected by the activity level of the connection.
Default 24
Format
ip http session hard-timeout <0-168>
Mode
Privileged EXEC
no ip http session hard-timeout
Use this command to restore the hard timeout for un-secure HTTP sessions to the default
value.
Format
no ip http session hard-timeout
Mode
Privileged EXEC

ip http authentication

Use this command to specify the authentication methods for http server users. The additional
methods of authentication are used only if the previous method returns an error, not if it fails.
To ensure that the authentication succeeds even if all methods return an error, specify none
as the final method in the command line. For example If none specified as an authentication
method after radius, no authentication is used if the radius server is down.
Format
ip http authentication method1 [method2 ...]
Mode
Global ConfigC
Term Definition
Local
Uses the local username database for authentication.
Radius
Uses the list of all RADIUS servers for authentication.
Tacacs
Uses the list of all TACACS servers for authentication.
None
Uses no authentication.
no ip http authentication
Use this command to restore the authentication methods to the default.
Format
no ip http authentication method1 [method2 ...]
Mode
Global Config
ProSafe Managed Switch
Management Commands
632