Show Captive-Portal Client Statistics; Show Captive-Portal Interface Client Status - NETGEAR ProSafe M7100-24X User Manual

show captive-portal client statistics

Use this command to display the statistics for a specific captive portal client. The macaddr is
client MAC address.
Format
show captive-portal client <macaddr> statistics
Mode
Privileged EXEC mode
Term Definition
Client MAC
The MAC address of the authenticated client
address
Bytes Received
The number of bytes received from the client
Bytes Transmitted
The number of bytes transmitted to the client
Packets Received
The number of packets received from the client
Packets
The number of packets transmitted from the client
Transmitted
Example
(switch)#show captive-portal client 0102.0304.0506 statistics
Client MAC Address........................ 0002.bc00.1290
Bytes Received............................ 0
Bytes Transmitted......................... 0
Packets Received.......................... 0
Packets Transmitted....................... 0

show captive-portal interface client status

Use this command to display information about clients authenticated on all interfaces or a
specific interface
Format
show captive-portal interface [<unit/slot/port>] client status
Mode
Privileged EXEC mode
Term Definition
Client Intf
Interface on which the clients are authenticated.
Client Intf
The interface description
Description
MAC Address
The MAC address of the authenticated user.
IP Address
The IP address of the authenticated user.
ProSafe Managed Switch
Captive Portal Commands
741