Show Vlan Brief; Show Vlan Port - NETGEAR ProSafe M7100-24X User Manual

show vlan brief

This command displays a list of all configured VLANs.
Format
show vlan brief
Mode
• Privileged EXEC
• User EXEC
Term Definition
VLAN ID
There is a VLAN Identifier (vlanid) associated with each VLAN. The range of the VLAN
ID is 1 to 3965.
VLAN Name
A string associated with this VLAN as a convenience. It can be up to 32 alphanumeric
characters long, including blanks. The default is blank. VLAN ID 1 always has a name of
"Default." This field is optional.
VLAN Type
Type of VLAN, which can be Default (VLAN ID = 1) or static (one that is configured and
permanently defined), or a Dynamic (one that is created by GVRP registration).

show vlan port

This command displays VLAN port information.
Format
show vlan port {<unit/slot/port> | all}
Mode
• Privileged EXEC
• User EXEC
Term Definition
Interface
Valid slot and port number separated by forward slashes. It is possible to set the
parameters for all ports by using the selectors on the top line.
Port VLAN ID
The VLAN ID that this port will assign to untagged frames or priority tagged frames
received on this port. The value must be for an existing VLAN. The factory default is 1.
Acceptable
The types of frames that may be received on this port. The options are 'VLAN only' and
Frame Types
'Admit All'. When set to 'VLAN only', untagged frames or priority tagged frames received
on this port are discarded. When set to 'Admit All', untagged frames or priority tagged
frames received on this port are accepted and assigned the value of the Port VLAN ID for
this port. With either option, VLAN tagged frames are forwarded in accordance to the
802.1Q VLAN specification.
Ingress
May be enabled or disabled. When enabled, the frame is discarded if this port is not a
Filtering
member of the VLAN with which this frame is associated. In a tagged frame, the VLAN is
identified by the VLAN ID in the tag. In an untagged frame, the VLAN is the Port VLAN ID
specified for the port that received this frame. When disabled, all frames are forwarded in
accordance with the 802.1Q VLAN bridge specification. The factory default is disabled.
GVRP
May be enabled or disabled.
Default Priority
The 802.1p priority assigned to tagged packets arriving on the port.
ProSafe Managed Switch
Switching Commands
58