Core - NETGEAR ProSafe M7100-24X User Manual

Core

Table 3. BSP Log Messages
Component Message
BSP
Event(0xaaaaaaaa)
BSP
Starting code...
Table 4. NIM Log Messages
Component Message
NIM
NIM: L7_ATTACH out of order for
intIfNum(x) unit x slot x port x
NIM
NIM: Failed to find interface at unit x slot x
port x for event(x)
NIM
NIM: L7_DETACH out of order for
intIfNum(x) unit x slot x port x
NIM
NIM: L7_DELETE out of order for
intIfNum(x) unit x slot x port x
NIM
NIM: event(x),intf(x),component(x), in
wrong phase
NIM
NIM: Failed to notify users of interface
change
NIM
NIM: failed to send message to NIM
message Queue.
NIM
NIM: Failed to notify the components of
L7_CREATE event
NIM
NIM: Attempted event (x), on USP x.x.x
before phase 3
NIM
NIM: incorrect phase for operation
NIM
NIM: Component(x) failed on event(x) for
intIfNum(x)
NIM
NIM: Timeout event(x), intIfNum(x)
remainingMask = "xxxx"
ProSafe Managed Switch
Cause
Switch has restarted.
BSP initialization complete, starting 7000
series application.
Cause
Interface creation out of order
There is no mapping between the USP and
Interface number
Interface creation out of order
Interface creation out of order
An event was issued to NIM during the
wrong configuration phase (probably Phase
1, 2, or WMU)
Event was not propagated to the system
NIM message queue full or non-existent
Interface not created
A component issued an interface event
during the wrong initialization phase
An API call was made during the wrong
initialization phase
A component responded with a fail
indication for an interface event
A component did not respond before the
NIM timeout occurred
Log Messages
700