Show Ipv6 Mld Interface - NETGEAR GSM7228PS Cli Manual

Up Time (hh:mm:ss)............................. 00:02:53
Expiry Time (hh:mm:ss)......................... ------
Filter Mode.................................... Include
Version1 Host Timer............................ ------
Group compat mode.............................. v2
Source Address
-----------------
2003::10
2003::20

show ipv6 mld interface

Use this command to display MLD-related information for the interface.
Format
show ipv6 mld interface [<unit/slot/port>]
Mode • Privileged EXEC
• User EXEC
The following information is displayed for each of the interfaces or for only the specified
interface.
Field Description
Interface The interface number in unit/slot/port format.
MLD Global Displays the configured administrative status of MLD.
Mode
MLD Operational The operational status of MLD on the interface.
Mode
MLD Version Indicates the version of MLD configured on the interface.
Query Interval Indicates the configured query interval for the interface.
Query Max Indicates the configured maximum query response time (in seconds) advertised in MLD
Response Time queries on this interface.
Robustness Displays the configured value for the tuning for the expected packet loss on a subnet
attached to the interface.
Startup Query This valued indicates the configured interval between General Queries sent by a Querier
interval on startup.
Startup Query This value indicates the configured number of Queries sent out on startup, separated by
Count the Startup Query Interval.
Last Member This value indicates the configured Maximum Response Time inserted into Group-Specific
Query Interval Queries sent in response to Leave Group messages.
IPv6 Multicast Commands
ExpiryTime
-----------
00:04:17
00:04:17
v1.0, July 2010
Managed Switch CLI Manual, Release 8.0.3
6-21