Up Time (hh:mm:ss)............................. 00:02:53
Expiry Time (hh:mm:ss)......................... ------
Filter Mode.................................... Include
Version1 Host Timer............................ ------
Group compat mode.............................. v2
Source Address
-----------------
2003::10
2003::20
show ipv6 mld interface
Use this command to display MLD-related information for the interface.
Format
show ipv6 mld interface [<unit/slot/port>]
Mode
• Privileged EXEC
• User EXEC
The following information is displayed for each of the interfaces or for only the specified
interface.
Field
Description
Interface
The interface number in unit/slot/port format.
MLD Global
Displays the configured administrative status of MLD.
Mode
MLD Operational
The operational status of MLD on the interface.
Mode
MLD Version
Indicates the version of MLD configured on the interface.
Query Interval
Indicates the configured query interval for the interface.
Query Max
Indicates the configured maximum query response time (in seconds) advertised in MLD
Response Time
queries on this interface.
Robustness
Displays the configured value for the tuning for the expected packet loss on a subnet
attached to the interface.
Startup Query
This valued indicates the configured interval between General Queries sent by a Querier
interval
on startup.
Startup Query
This value indicates the configured number of Queries sent out on startup, separated by
Count
the Startup Query Interval.
Last Member
This value indicates the configured Maximum Response Time inserted into Group-Specific
Query Interval
Queries sent in response to Leave Group messages.
IPv6 Multicast Commands
ExpiryTime
-----------
00:04:17
00:04:17
v1.0, July 2009
Managed Switch CLI Manual, Release 8.0
6-21