Show Ipv6 Ospf Interface Brief - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Term Definition
Retransmit The frequency, in seconds, at which the interface sends LSA.
Interval
Hello Interval The frequency, in seconds, at which the interface sends Hello packets.
Dead Interval The amount of time, in seconds, the interface waits before assuming a neighbor is down.
LSA Ack The amount of time, in seconds, the interface waits before sending an LSA
Interval
acknowledgement after receiving an LSA.
Iftransit Delay The number of seconds the interface adds to the age of LSA packets before
Interval
transmission.
Authentication The type of authentication the interface performs on LSAs it receives.
Type
Metric Cost The priority of the path. Low costs have a higher priority than high costs.
Passive Status Shows whether the interface is passive or not.
OSPF MTU- Shows whether to ignore MTU mismatches in database descriptor packets sent from
ignore
neighboring routers.
The following information only displays if OSPF is initialized on the interface:
Term Definition
OSPF Interface Broadcast LANs, such as Ethernet and IEEE 802.5, take the value broadcast. The OSPF
Type
Interface Type will be 'broadcast'.
State The OSPF Interface States are: down, loopback, waiting, point-to-point, designated
router, and backup designated router.
Designated The router ID representing the designated router.
Router
Backup The router ID representing the backup designated router.
Designated
Router
Number of Link The number of link events.
Events
Metric Cost The cost of the OSPF interface.

show ipv6 ospf interface brief

This command displays brief information for the IFO object or virtual interface tables.
IPv6 Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
7-62