Show Ipv6 Ospf Interface Brief - NETGEAR M6100 Series Reference Manual

The following information only displays if OSPF is initialized on the interface.
Term
OSPF Interface Type
State
Designated Router
Backup Designated Router
Number of Link Events
Metric Cost

show ipv6 ospf interface brief

This command displays brief information for the physical interface or virtual interface tables.
Format
show ipv6 ospf interface brief
Modes Privileged EXEC
User EXEC
Term Definition
Interface
unit/slot/port
OSPF Admin Mode States whether OSPF is enabled or disabled on a router interface.
OSPF Area ID The OSPF Area ID for the specified interface.
Router Priority The router priority. The router priority determines which router is the designated router.
Metric Cost The priority of the path. Low costs have a higher priority than high costs.
Hello Interval The frequency, in seconds, at which the interface sends Hello packets.
Dead Interval The amount of time, in seconds, the interface waits before assuming a neighbor is down.
Retransmit Interval The frequency, in seconds, at which the interface sends LSA.
Retransmit Delay The number of seconds the interface adds to the age of LSA packets before transmission.
Interval
LSA Ack Interval The amount of time, in seconds, the interface waits before sending an LSA acknowledgement
after receiving an LSA.
M6100 Series Switches
Definition
Broadcast LANs, such as Ethernet and IEEE 802.5, take the value broadcast. The
OSPF Interface Type is broadcast.
The OSPF Interface States are: down, loopback, waiting, point-to-point, designated
router, and backup designated router.
The router ID representing the designated router.
The router ID representing the backup designated router.
The number of link events.
The cost of the OSPF interface.
IPv6 Commands
962