Area Nssa No-Summary (Ospfv); Area Nssa Translator-Role (Ospfv); Area Nssa Translator-Stab-Intv (Ospfv) - NETGEAR GSM7228PS Cli Manual

area nssa no-summary (OSPFv3)
This command configures the NSSA so that summary LSAs are not advertised into the NSSA.
Format
area <areaid> nssa no-summary
Mode Router OSPFv3 Config
no area nssa no-summary (OSPFv3)
This command disables nssa from the summary LSAs.
Format
no area <areaid> nssa no-summary
Mode Router OSPF Config
area nssa translator-role (OSPFv3)
This command configures the translator role of the NSSA. A value of always causes the router to
assume the role of the translator the instant it becomes a border router and a value of candidate
causes the router to participate in the translator election process when it attains border router
status.
Format
area <areaid> nssa translator-role {always | candidate}
Mode Router OSPFv3 Config
no area nssa translator-role (OSPFv3)
This command disables the nssa translator role from the specified area id.
Format
no area <areaid> nssa translator-role {always | candidate}
Mode Router OSPF Config
area nssa translator-stab-intv (OSPFv3)
This command configures the translator <stabilityinterval> of the NSSA. The
<stabilityinterval> is the period of time that an elected translator continues to perform its
duties after it determines that its translator status has been deposed by another router.
IPv6 Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
7-40