Configure Area 1 As A Nssa Area - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch Software Administration Manual
7000 series managed switch administration guide for software version 8.0.3
Hide thumbs
Also See for GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch:
- User manual (628 pages) ,
- Cli manual (788 pages) ,
- Hardware installation manual (39 pages)
Table of Contents
Advertisement
ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
c.
Click Apply to save the settings.
5.
Configure area 0.0.0.1 as a stub area.
a.
From the main menu, select Routing > OSPF > Advanced> Stub Area Configuration. A screen
similar to the following displays.
Figure 6-28
b. Enter the following information in the Sub Area Configuration.
In the Area ID field, enter 0.0.0.1.
c.
Click Add to save the settings.
Configure Area 1 as a nssa Area
Port 2/0/11
Area 0
Figure 6-29
The example is shown as CLI commands and as a Web interface procedure.
6-24
Layer 3
Switch
Port 2/0/191
v1.0, June 2010
Port 1/0/151
Area 1
Layer 3
Switch
OSPF
Advertisement
Table of Contents
