Area Nssa Default-Info-Originate; Area Nssa No-Redistribute (Ospf); Area Nssa No-Summary (Ospf); Area Nssa Translator-Role (Ospf) - NETGEAR GSM7248R Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7200RS Series Layer-2 Stackable Switches

14.5.7 area nssa default-info-originate

This command configures the metric value and type for the default route advertised into
the NSSA. The optional metric parameter specifies the metric of the default route and is to
be in a range of 1-16777215. If no metric is specified, the default value is ****. The
metric type can be comparable (nssa-external 1) or non-comparable (nssa-external 2).
Format
Mode

14.5.8 area nssa no-redistribute (OSPF)

This command configures the NSSA ABR so that learned external routes will not be
redistributed to the NSSA.
Format
Mode

14.5.9 area nssa no-summary (OSPF)

This command configures the NSSA so that summary LSAs are not advertised into the
NSSA.
Format
Mode

14.5.10 area nssa translator-role (OSPF)

This command configures the translator role of the NSSA. A value of
router to assume the role of the translator the instant it becomes a border router and a value
of causes the router to participate in the translator election process when it
candidate
attains border router status.
Format
Mode
14-28
area <areaid> nssa default-info-originate [<met-
ric>] [{comparable | non-comparable}]
Router OSPF Config
area <areaid> nssa no-redistribute
Router OSPF Config
area <areaid> nssa no-summary
Router OSPF Config
area <areaid> nssa translator-role {always | can-
didate}
Router OSPF Config
v1.0, October 2008
causes the
always
Routing Commands