T320 Craft Interface Sib Leds; Table 7: Sib Leds On The Craft Interface - Juniper Core Router T Series Hardware Manual

T320 Core Router Hardware Guide
Related
Documentation

T320 Craft Interface SIB LEDs

Related
Documentation
24
Table 6: FPC LEDs (continued)
Label Color
Green
OK
T320 Chassis Description on page 13
Replacing a T320 Craft Interface on page 189
Each SIB has two LEDs on the craft interface that indicate its status. The SIB LEDs, labeled
through , are located on the upper right of the craft interface. The
SIB0 SIB2
on the SIB faceplate is not replicated on the craft interface.
the functions of the SIB LEDs.

Table 7: SIB LEDs on the Craft Interface

Label Color
Red
FAIL
Green
OK
T320 Chassis Description on page 13
Replacing a T320 Craft Interface on page 189
State Description
On steadily FPC is functioning normally.
Blinking FPC is starting up.
State Description
On steadily SIB has failed.
On steadily SIB is functioning normally.
ACTIVE
Table 7 on page 24 describes
Copyright © 2018, Juniper Networks, Inc.
LED