Replacing The Ssd On An Re-B-1800 Routing Engine; Figure 42: Installing The Routing Engine; Figure 43: Re-B-1800 Storage Drive Slots - Juniper M7i Hardware Manual

See Also
Related
Documentation

Replacing the SSD on an RE-B-1800 Routing Engine

Copyright © 2019, Juniper Networks, Inc.
Tighten the thumbscrews at each end of the Routing Engine.
4.
You can verify correct Routing Engine functioning by issuing the
5.
show chassis routing-engine
Engine" on page 192.

Figure 42: Installing the Routing Engine

Preventing Electrostatic Discharge Damage to an M7i Router on page 228
M7i Chassis Description on page 11
M7i Routing Engine Description on page 17
Removing an M7i Routing Engine on page 141
Preventing Electrostatic Discharge Damage to an M7i Router on page 228
M7i Chassis Description on page 11
M7i Routing Engine Description on page 17
Maintaining the M7i Routing Engine on page 192
The RE-B-1800 Routing Engine supports a solid-state drive (SSD) specified by Juniper
Networks and ships with one SSD installed.
of storage drive slots on an RE-B-1800 Routing Engine.

Figure 43: RE-B-1800 Storage Drive Slots

Auxiliary
port
Management Console
port port
Chapter 23: Replacing Host Subsystem Components
command, described in "Maintaining the M7i Routing
Figure 43 on page 143
Handle
SSD
slot
USB
port
shows the arrangement
143